How To Install HP Officejet 6600 Printer?

How To Install HP Officejet 6600 Printer

Proceed with the steps that are given below how to install HP Officejet 6600 printer.

Step 1: Unpacking the printer

  • Remove all the packing materials from the HP printer and place it in a location away from direct sunlight.
  • Lift the top cover of the printer and remove the cardboard present inside the printer.

Step 2: Fixing the duplexer

  • Unpack the duplexer and remove the packing tapes from it.
  • Now, insert the duplexer into the correct slot on the rear of the printer.
  • Push the duplexer gently until it clicks into place.

Step 3: Connecting power cord

  • Connect the power cord to the rear of the printer.
  • Plug the other end of the cord to a power source.
  • Tap the Power button on the control panel of the printer.
  • Follow these steps we can execute that how to install HP Officejet 6600 printer.

Step 4: Loading Paper

  • Raise the output tray and slide the paper-width guide to the edges of the tray.
  • Now, load a stack of paper into the right edge of the tray. The print side of the paper should face down.
  • Move the paper-width guide against the paper stack and lower the output tray.
  • Pull the extension out of the output tray.

Step 5: Installing printhead

  • Open the top cover to install the printhead into the printer.
  • Raise the gray latch on the printhead assembly.
  • Make sure not to touch the contacts of the printhead.
  • Remove the packing materials from the printhead.
  • Hold the printhead upright and insert it into the printhead holder.
  • Ensure that the color codes of the printhead assembly match with that of the printhead while fixing.
  • Lower the gray latch and install the cartridges.
  • Dispose the plastic cover on each cartridge and rotate the orange cap counterclockwise to remove it.
  • Insert each cartridge correctly, matching the color label.
  • Press down the cartridge to hold into place.
  • Make sure that the contacts of the cartridges are facing the printhead.
  • After installing all the cartridges, lower the top cover.
  • Check the alignment of the cartridges by printing an alignment page.
  • Using these steps we can execute that how to install HP Officejet 6600 printer.

Step 6: Installing the printer software

  • You have to install the software to connect your printer and computer.
  • Insert the installation disc into the CD drive of your computer.
  • Otherwise, download the driver from the official HP website.
  • Open your browser and enter the official HP website.
  • Navigate to the Software and drivers page, type your printer model number in the Search section, and tap Enter.
  • Choose your operating system and select the required driver in the Drivers section.
  • To get access to all the functionalities of the printer, download the recommended driver.
  • Run the installer file and complete the installation by following the instructions on the screen.
  • Choose a suitable connection type when prompted.
  • After installing the software, you can print from your computer easily.
  • By utilizing these steps we can execute that how to install HP Officejet 6600 printer.