How To Configure canon imageclass mf741cdw setup?

Canon Mf741cdw Setup

Canon imageCLASS printer is a multifunctional color laser printer that increases your productivity with its printing, scanning, and copying features. Have you recently purchased this printer and going to set it up for the first time? No worries. You are on the right site. The printer setup and installation process are quite easy to finish. Just perform the below instructions carefully to complete your Canon imageCLASS MF741Cdw printer setup.

CANON MF741CDW HARDWARE SETUP

  • Canon printer
  • Toner Cartridge (Black, Cyan, Yellow, Magenta)
  • Power cord
  • Starter Guide
  • User Software DVD-ROM
  • Warranty Card

Make sure that all the contents are available inside the box.

UNPACKING THE PRINTER

  • Open the printer box and remove the power cord and printed documentation from the package.
  • Next, you can take out all the remaining contents from the box.
  • Lift the printer out of the package.
  • Discard the foam packing materials from both sides of the printer
  • Uncover the printer from the plastic bag.
  • Next, remove all the protective tapes around the printer.
  • Lift the scanner lid and discard the protective sheet from the scanner glass.
  • Close the scanner lid.

LOADING THE PAPER

  • Pull out the input paper cassette from the Canon imageCLASS MF741Cdw printer.
  • Now, slide the paper width guide as far as possible.
  • Load the sheets into the input paper tray.
  • Do not load the sheets more than the maximum limit.
  • Next, adjust the paper width guide to the edges of the stack.
  • Loading The Paper
  • Insert the input paper cassette into the printer.
  • Close the front cover of the printer.

INSTALLING THE TONER CARTRIDGES

  • This printer comes with preinstalled toner cartridges (Black, Cyan, Yellow, Magenta).
  • Installing The Toner Cartridges
  • So, you don’t need to install it while setting up your printer for the first time.
  • But, you need to replace the toner cartridge when it is running low.

CONNECTING THE POWER CORD

  • Plug the power cord to the back of the printer and the other end into a wall socket.
  • Hit the Power button to turn on the canon mf741cdw setup printer.
  • Select your language and choose your country/region on the printer screen.
  • Perform the instructions on your printer screen and complete the initial setup.

CANON MF741CDW SOFTWARE SETUP

  • Load the installation CD into your computer’s CD-ROM drive and complete the installation process.
  • Open the default browser on your computer in case you don’t have the driver installation CD.
  • Next, visit your Canon MF741Cdw printer’s official support page.
  • Here, browse the printer model name by selecting the Printers section from the Product Type section.
  • In the next window, choose your device name from the list.
  • Now, select your printer’s model number from the list.
  • Click on the Drivers & Downloads button at the top of the window.
  • Below the Drivers & Downloads category, choose your operating system with the version from the drop-down list and select your language.
  • Choose the respective driver file below the Recommended Drivers section and click the Select button placed straight to it.
  • Click Download below the selected driver file.
  • Now, the driver file will start to download on your computer.
  • After completing the driver download, launch the executable file and finish the installation process.

You can complete your canon imageclass mf741cdw printer’s hardware and software setup by following the above instructions.